Intel SR1680MV Manuel D’Utilisation
Intel
®
Server System SR1680MV Service Guide
35
Installing a System Fan
Reverse the
steps to install the system fan.
Air Duct
Note: Before you remove or install the air duct, complete the following steps:
1. Make sure the server is not turned on or connected to the AC power. To power off
the server, see
.
3. Disconnect all necessary cable connections.
Removing the IOB Air Duct
1. Lift the air duct up from the I/O board cage module.
Figure 41. Lift Air Duct Up
Figure 41 shows the air duct located on I/O board.