Metrologic Instruments MS7320 Manuel D’Utilisation

 

 

20 

P

OWER 

S

AVE 

M

ODES AND THE 

M

ULTI

-F

UNCTION 

B

UTTON

  

 

The MS7320 has five configurable power save modes.  Refer to the MetroSelect 
Configuration Guide

 for additional information on Power Save Modes. 

 

1.  Blink Power Save Mode (Default): 

“Blinks” the laser OFF & ON after a configured period of non-use. 

When the scanner recognizes a bar code it will exit the Blink mode. 

 

2.  Laser Off Power Save Mode:  

Turns the laser OFF after a configured period of non-use.   

The motor continues to spin allowing for a faster “wake” up time.  Pressing 

the Multi-Function button will “wake” the scanner from the Laser Off power 

save mode (see figure 17).   

 

3.  Laser & Motor Off Power Save Mode:  

Turns the laser and motor OFF after a configured period of non-use. 

Pressing the Multi-Function button will “wake” the scanner from the power 

save mode (see figure 17). This mode is the only power save mode that can 

be activated by the Multi-Function Button (see figure 16).  This mode’s  

“wake up” time is slightly longer due to the motor’s need to restart. 

 

4.  Dual Action Power Save Mode #1: 

“Blinks” the laser OFF & ON after a configured period of non-use turns the 

laser and motor OFF at thirty-minute intervals. 

 

 

If the power save timeout 

is set to 15 minutes. 

 

 

Pressing the Multi-Function button will “wake” the scanner from the power 

save mode (see figure 17). 

 

5.  Dual Action Power Save Mode #2: 

Turns the laser OFF after a configured period of non-use then turns the 

motor OFF after thirty-minute intervals. 

 

 

If the power save timeout 

is set to 15 minutes. 

 

 

Pressing the Multi-Function button will “wake” the scanner from the power 

save mode (see figure 17). 

 

Laser starts 

“Blinking” 

Laser & Motor 

turn OFF 

Last 

Scan 

Laser turns  

OFF 

Motor turns 

OFF 

Last 

Scan