Fujitsu B120 Manuel D’Utilisation
Accessible drives
System components and expansions
A26361-K646-Z102-1-7619
49
8.2.1 Installing/Removing an accessible 5 ¼-inch drive
Ê
Shut down the operating system.
Ê
Switch off the server, and disconnect it from the network.
!
Switching off the server does not disconnect the device from the network. To completely
disconnect the device from the network, remove the power plug from the line voltage.
disconnect the device from the network, remove the power plug from the line voltage.
Ê
Open the server (see "
").
1
2
3
Ê
Disconnect the cables from the drive (1).
Ê
Remove the two fastening screws (2) and take out the drive toward the front (3).
The new drive is mounted in reverse order.
If you do not install a new drive, proceed as follows:
1
a
2
b
Ê
Mount an EMC insert (a) and a plastic cover (b) in the empty bay (1 + 2).
Ê
Close the server again (see "