Fujitsu LT800P Manuel D’Utilisation
89
U s i n g t h e W i r e l e s s L A N
Other computers
are not displayed
when the [Network
Computer] icon is
double-clicked.
are not displayed
when the [Network
Computer] icon is
double-clicked.
(continued)
The TCP/IP
protocol is not
installed, or, the IP
address is not set
correctly.
protocol is not
installed, or, the IP
address is not set
correctly.
If the TCP/IP protocol is installed, do the
following to check the IP address:
following to check the IP address:
1. Windows 2000:
Click [Start] -> [Programs] -> [Acces-
sories] -> [Command Prompt].
sories] -> [Command Prompt].
Windows XP:
Click [Start] -> [All Programs] ->
[Accessories] -> [Command Prompt].
Click [Start] -> [All Programs] ->
[Accessories] -> [Command Prompt].
2. Enter “IPCONFIG” command, and
press [Enter].
(If your hard disk is C drive, enter
C:\>ipconfig)
C:\>ipconfig)
Check that the IP address is correctly
displayed under the IP Address.
displayed under the IP Address.
Example:
IP address: 10.0.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
No communication
due to poor radio
signal.
due to poor radio
signal.
Shorten the distance between computers
or remove visible obstacles between them,
and retry the connection.
or remove visible obstacles between them,
and retry the connection.
Problem
Possible Cause
Possible Solution
58-0867-01.book Page 89 Thursday, February 13, 2003 1:18 PM