2nd Ave. 7750 Manuel D’Utilisation

Perform these steps only for Mac OS X, versions 10.1 and 10.2:

Open the Network Utility, then click the Ping tab.

Enter your printer’s IP address.

Click Ping. If you do not get a response, confirm that your TCP/IP settings are correct for 
both your printer and computer.

For AppleTalk, follow the steps below. For TCP/IP proceed to Step 5.

From the printer’s front panel, verify that EtherTalk is enabled. If it is not, enable it in 
the front panel, then reset the printer.

Print the “Configuration Page” and verify that EtherTalk is enabled.

From the “Configuration Page”, verify the Zone. If you have multiple zones on your 
network, verify that your printer appears in the desired zone.

If you are still unable to print, go to 

 or access 

PhaserSMART Technical Support through CentreWare Internet Services:

Launch your web browser.

Enter your printer's IP address in the browser’s Address field (http://
xxx.xxx.xxx.xxx). 

Select Support. 

Click the PhaserSMART Diagnostic Tool link to access PhaserSMART.