Barco SJ/T 11363-2006 Manuel D’Utilisation
52
PDS • User’s Guide
4. Operation
Setup Menu
lìíéìí=jÉåì
From the Setup Menu, select Output to display the Output Menu.
Figure 4-24.
Output Menu (sample)
Following are descriptions of each Output Menu function:
•
•
j~áå
Following are descriptions of each Output Menu function:
•
•
•
•
•
•
lìíéìí=cçêã~í
From the Output Menu, select the top Output Format line to view or change the current
output format. This line indicates the format in the following form:
output format. This line indicates the format in the following form:
Hact x Vact @ Vr Hz
The output format for the PDS can be set to any of the progressive outputs.
qÉëí=m~ííÉêå
From the Output Menu, select Test Pattern to display the Test Patterns Menu:
Figure 4-25.
Test Patterns Menu (sample)
The following functions are available on the menu:
•
Mode
— This function enables or disables the test pattern generator.
OUTPUT
> Main
>>
Preview
>>
Note
The output format is not updated until SEL is pressed.
TEST PATTERN
> Mode
ON
Type
Burst
Raster Box
OFF