Sony 8000SF Manuel D’Utilisation
259
Names and Functions of Parts of the Control Panel
Chap
of the source name display, for each source
separately. You can set the source name
display mode and background color in a
Setup menu.
separately. You can set the source name
display mode and background color in a
Setup menu.
f SHIFT button
When this button is enabled, either the
source name displays show the shifted
signal names, or the shifted signals for all
buses in this M/E (P/P) bank are enabled.
You can select either mode in a Setup
menu.
Each press of the button toggles between
the enabled and disabled states.
In the case of a module without source
name displays, when “Display” is selected
in the Setup menu, this button is invalid.
When this button is enabled, either the
source name displays show the shifted
signal names, or the shifted signals for all
buses in this M/E (P/P) bank are enabled.
You can select either mode in a Setup
menu.
Each press of the button toggles between
the enabled and disabled states.
In the case of a module without source
name displays, when “Display” is selected
in the Setup menu, this button is invalid.
g M/E bank display
This indicates the notional mix/effect bank
name to which the particular M/E or PGM/
PST bank is assigned, as a four-character
identifier.
This indicates the notional mix/effect bank
name to which the particular M/E or PGM/
PST bank is assigned, as a four-character
identifier.
h Macro buttons
PRE MCRO (pre macro) button: Use this
PRE MCRO (pre macro) button: Use this
button to set a macro attachment in pre
macro mode. For setting in macro only
mode, use this in combination with a
macro only set button assigned to the
utility/shotbox control block or a user
preference button. Alternatively,
without using the button, you can make
the selection simply, by pressing
simultaneously with the [POST
MCRO] button.
When dual background bus mode is
selected in setup, this switches the dual
background bus mode on and off.
When set to utility/shotbox mode, this
enables and disables the use of the key
2 row as a utility/shotbox.
If in setup this is assigned to the
function for disabling cross-point
button operations, then it enables or
disables cross-point button operations.
macro mode. For setting in macro only
mode, use this in combination with a
macro only set button assigned to the
utility/shotbox control block or a user
preference button. Alternatively,
without using the button, you can make
the selection simply, by pressing
simultaneously with the [POST
MCRO] button.
When dual background bus mode is
selected in setup, this switches the dual
background bus mode on and off.
When set to utility/shotbox mode, this
enables and disables the use of the key
2 row as a utility/shotbox.
If in setup this is assigned to the
function for disabling cross-point
button operations, then it enables or
disables cross-point button operations.
POST MCRO (post macro) button: Use
this button to set a macro attachment in
post macro mode. For setting in macro
only mode, use this in combination
with a macro only set button assigned
to the utility/shotbox control block or a
user preference button. Alternatively,
without using the button, you can make
the selection simply, by pressing
simultaneously with the [PRE MCRO]
button.
When dual background bus mode or
utility/shotbox mode is selected in
setup, this button is disabled.
If in setup the function for disabling
cross-point button operations is
assigned to the [PRE MCRO] button,
then this button is disabled.
post macro mode. For setting in macro
only mode, use this in combination
with a macro only set button assigned
to the utility/shotbox control block or a
user preference button. Alternatively,
without using the button, you can make
the selection simply, by pressing
simultaneously with the [PRE MCRO]
button.
When dual background bus mode or
utility/shotbox mode is selected in
setup, this button is disabled.
If in setup the function for disabling
cross-point button operations is
assigned to the [PRE MCRO] button,
then this button is disabled.
MCRO ATTCH ENBL (macro
attachment enable) button: When
this button is on, the macro attachments
set for the buttons of the M/E bank are
enabled.
this button is on, the macro attachments
set for the buttons of the M/E bank are
enabled.