Avaya P460 Manuel D’Utilisation
Chapter 5
Avaya P460 Layer 3 Features
Avaya P460 Configuration Guide
57
When the DHCP/BOOTP server is configured to allocate addresses only from a
single subnetwork among the different subnetworks defined on the VLAN, you
might need to configure the P460 with the relay address on that subnet so the
DHCP/BOOTP server can accept the request.
DHCP/BOOTP Relay in P460 is configurable per VLAN and allows for two DHCP/
BOOTP servers to be specified. In this case, the P460 duplicates each request, and
sends it to both servers. This duplication provides redundancy and prevents the
failure of a single server from blocking hosts from loading.
You can enable or disable or DHCP/BOOTP Relay in P460.
single subnetwork among the different subnetworks defined on the VLAN, you
might need to configure the P460 with the relay address on that subnet so the
DHCP/BOOTP server can accept the request.
DHCP/BOOTP Relay in P460 is configurable per VLAN and allows for two DHCP/
BOOTP servers to be specified. In this case, the P460 duplicates each request, and
sends it to both servers. This duplication provides redundancy and prevents the
failure of a single server from blocking hosts from loading.
You can enable or disable or DHCP/BOOTP Relay in P460.
BOOTP/DHCP CLI Commands
In order to...
Use the following command...
Enable or disable relaying of bootp
and dhcp requests to the BOOTP/
DHCP server
and dhcp requests to the BOOTP/
DHCP server
Add or remove a BOOTP/DHCP
server to handle BOOTP/DHCP
requests received by this interface
server to handle BOOTP/DHCP
requests received by this interface
Select the network from which the
bootp/dhcp server allocates an
address
bootp/dhcp server allocates an
address