Avaya P550R Manuel D’Utilisation
A-3
610-0184-095
June 14, 2001
where
<slot>
is the slot number. If you specify this parameter, then all
ports on the module in slot
<slot>
are set the same way.
<slot-swport-range>
is a slot and port range in the form of
3/1
or
3/1-5
. If you specify this parameter, then only ports
<swport-
range>
on the module in slot
<slot>
are set.
{on|off}
indicates whether you want the port to ignore tag
priority. Enter
on
for the port to ignore the tag priority.
Examples
■
To set all ports on the module in slot 3 to ignore the 802.1p
tag priority, enter:
tag priority, enter:
set port ignore-tag-priority 3 on
■
To set ports 1 through 5 on the module in slot 3 to not ignore
the 802.1p tag priority, enter:
the 802.1p tag priority, enter:
set port ignore-tag-priority 3/1-5 off
■
To set ports 1 through 5 on the module in slot 3 and port 1 on
the module in slot 6 to ignore the 802.1p tag priority, enter:
the module in slot 6 to ignore the 802.1p tag priority, enter:
set port ignore-tag-priority 3/1-5,6/1 on
Displaying the Port Settings
Command
Use the
show port
command to display the settings of a port. The
syntax of the command is:
show port [{<slot>|<slot-swport-range>}
[...,{<slot>|<slot-swport-range>}]]
where
<slot>
is the slot number. If you specify this parameter, then the
settings of all the ports on the module in slot
<slot>
are displayed.
<slot-swport-range>
is a slot and port range in the form of
3/1
or
3/1-5
. If you specify this parameter, then settings for only the
ports <swport-range> on the module in slot <slot> are displayed.