Avaya P550R Manuel D’Utilisation

                   7

610-0184-095

June 14, 2001

Use the following CLI commands to configure port mirroring on 80-
series modules. You must be in Global Configuration command 
mode to enter these commands. 

* Note:  For information on how to enter Global Configuration 

command mode, see “Accessing/Exiting the Command 
Modes” in chapter 1 of Cajun P550R/P880/P882 Command 
Reference Guide.

To set up port mirroring, use the following CLI command: 

>(config)# set port mirror fabric_mode2 

source-port <mod-port-range> mirror-port 

<mod-port-spec> channel <channel> direction 

{tx | rx | both} sampling {always | disable | 

periodic} [max-packets=sec <max-packets-sec-

value>]

where:

■

<mod-port-range>

 is either the single port or the range of 

ports that you want to mirror. 

See Table 2 on page 8 for the specific port ranges that you can 
mirror.