3com 4500 PWR 26-PORT Manuel D’Utilisation

Protocol: #Static

Preference: 60

*NextHop: 2.1.1.1

Interface: 2.1.1.1(LoopBack1)

Vlinkindex: 0

State: <Int ActiveU Static Unicast>

Age: 4:479

Cost: 0/0

Tag: 0

For detailed description of output information, refer to 

ask1 ip_address2 mask2 

All views

 mask1 

Enter the destination IP address and subnet mask that you 

want to start the address range. This command displays the route for your chosen 
address range. The subnet mask can be entered as either a dotted decimal 
notation (x.x.x.x), or an an integer in the range 0 to 32.

Enter the IP address and subnet mask that you want to end 

the address range. The subnet mask can be entered as either a dotted decimal 
notation (x.x.x.x), or an integer in the range 0 to 32.

 Enter to display the verbose information of both the active and inactive 

routes. Without this parameter, the command only displays a summary of active 
routes. Optional.

Use the 

command to view the route information for the specified address range. 

To display the routing information of destination addresses ranging from 1.1.1.0 
to 2.2.2.0., with a subnet mask of 24, enter the following:

<4500>display ip routing-table 1.1.1.0 24 2.2.2.0 24

The information displays in the following format:

Routing tables:

  Summary count: 3

Destination/Mask   Proto   Pre Cost Nexthop

Interface

1.1.1.0/24         DIRECT  00

 1.1.1.1 

Vlan-interface1

1.1.1.1/32         DIRECT  00

 127.0.0.1 InLoopBack0

2.2.2.0/24         DIRECT  00

 2.2.2.1 

Vlan-interface2

For a detailed description of the output information, refer to 

.

display ip routing-table ip-prefix ip_prefix_name [ verbose ]