3com 4500 PWR 26-PORT Manuel D’Utilisation

C

HAPTER

 6: U

SING

 R

OUTING

 P

ROTOCOL

 C

OMMANDS

Use the 

 command to configure RIP to filter the advertised 

routing information.

Use the 

 

 command to configure RIP not to filter the 

advertised routing information. This is the default.

Related commands: 

, 

, 

.

To filter the advertised route information using ACL 2000, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]rip

[4500-rip]filter-policy 2000 export

filter-policy gateway ip_prefix_name import

undo filter-policy gateway ip_prefix_name import

filter-policy { acl_number | ip-prefix ip_prefix_name [ gateway 

 ] | route-policy route-policy-name } import

undo filter-policy { acl_number | ip-prefix ip_prefix_name

 | [ 

 ] | route-policy route-policy-name } import

RIP View

gateway ip_prefix_name 

Enter the name of the address prefix list. This is used to 

filter the addresses of the neighboring routers that are advertising the routing 
information.

 Enter an ACL number. This is used to filter the destination addresses 

of the routing information.

Enter the name of the address prefix list. This is used to filter the 

destination addresses of the routing information.

: Route policy name that filters routing information. After 

enabling RIP protocol, you can determine which routes are to be sent/received 
based on acl/cost/interface/ip/ip-prefix fields.

Use the 

 import command to configure the switch to 

filter the routing information received from a specified address. 

Use the 

 command to configure the 

switch not to filter the routing information received from the specified address.