3com 4500 PWR 26-PORT Manuel D’Utilisation

System view

 Connection timeouts (measured in minutes), ranging from 1 to 35791; 

The default connection timeout time is 30 minutes.

■

Use the 

command to configure connection timeout interval. 

■

Use the 

 command to restore the default connection 

timeout interval.

After a user logs on to an FTP Server and has established connection, if the 
connection is interrupted or cut abnormally by the user, FTP Server will still hold 
the connection. The connection timeout can avoid this problem. If the FTP server 
has no command interaction with a client for a specific period of time, it considers 
the connection to have failed and disconnects the client. 

Set the connection timeout to 36 minutes.

<4500>sys

System View: return to User View with Ctrl+Z.

[4500]ftp timeout 36

[4500]

 user_name

 | all [ service-type { telnet | ftp | 

System view

user_name:

 Enter a local user name, up to 80 characters in length, excluding "/", 

":", "*", "?", "<" and ">". (The @ character can be used once in a 

; 

that part of the user name which precedes the @ symbol must not be more than 
55 characters in length. The user-name is case-insensitive, so that UserA is the 
same as usera.

 Specifies all users.

 Specifies the service type, which can be one of the following:

 Specifies the user type of Telnet.

 Specifies the user type of FTP.

 Specifies the user type of LAN access, which mainly refers to 

Ethernet-accessing users.

:Specifies that the user type is SSH.