3com 4500 PWR 26-PORT Manuel D’Utilisation

C

HAPTER

 1: U

SING

 S

YSTEM

 A

CCESS

 C

OMMANDS

VTY user interface view

 Supports both Telnet and SSH protocols.

 Supports only SSH protocol. 

 Supports only Telnet protocol.

Use the 

 command to configure the protocols supported by a 

designated user interface.

By default, the user interface supports Telnet and SSH protocol.

For the related commands, see 

. 

Configure SSH protocol supported by VTY0 user interface. 

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]user-interface vty 0

[4500-ui-vty0]protocol inbound ssh

All views

None

Use the 

 command to exit from the current view to the next highest view. If 

the current view is user view, this command quits the system. 

There are three levels of view, which are, from high to low:  

■

user view

■

system view

■

menu views, for example VLAN view, Ethernet port view, and so on.

Related commands: 

, 

.

To return to user view from system view, enter the following:

[4500]quit

<4500>