Q-Logic 59226-00 B Manuel D’Utilisation
3 – Managing Fabrics
Managing the Fabric Database
59226-00 B
3-5
A
3.3.1
Adding a Fabric
To add a fabric to the database, do the following:
1.
Open the Fabric menu and select Add Fabric to open the Add a New Fabric
dialog as shown in
dialog as shown in
.
Figure 3-2. Add a New Fabric Dialog
2.
Enter a fabric name (optional) and the IP address of the switch through
which to manage the fabric.
which to manage the fabric.
3.
Enter an account name and password. The factory account name and
password are "admin" and "password". The password is for the switch and is
stored in the switch firmware. Refer to
password are "admin" and "password". The password is for the switch and is
stored in the switch firmware. Refer to
for information about creating user accounts.
4.
Click the Add Fabric button.
NOTE:
A switch supports a combined maximum of 19 logins or sessions
reserved as follows:
4 logins or sessions for internal applications such as
reserved as follows:
4 logins or sessions for internal applications such as
management server and SNMP
9 high priority Telnet sessions
6 logins or sessions for SANsurfer Switch Manager inband
6 logins or sessions for SANsurfer Switch Manager inband
and out-of-band logins, Application Programming Interface
(API) inband and out-of-band logins, and Telnet logins.
Additional logins will be refused.
(API) inband and out-of-band logins, and Telnet logins.
Additional logins will be refused.