Q-Logic 5802V Manuel D’Utilisation
7 – Zoning Configuration
Displaying Zoning Database Information
7-2
59263-01 A
S
Displaying Zoning Database Information
A switch maintains three zoning databases:
Non-volatile–This zoning database is permanent and contains all zone sets,
zones, and aliases that you create and save on a switch. The zone sets in
the non-volatile zoning database are known as configured zone sets.
zones, and aliases that you create and save on a switch. The zone sets in
the non-volatile zoning database are known as configured zone sets.
Volatile–This zoning database is temporary. This means it is not retained
across switch resets. The volatile zoning database can be the working copy
of a zone set being edited or the active zone set received from another
switch. In the latter case, this is also known as the merged zone set.
across switch resets. The volatile zoning database can be the working copy
of a zone set being edited or the active zone set received from another
switch. In the latter case, this is also known as the merged zone set.
Active–This zoning database is the active zone set.
You can display the following information about the zoning database:
Configured Zone Set Information
commands display information about the all
zone sets in the non-volatile zoning database. Enter the Zoneset List command to
display a list of the zone sets as shown in the following example:
display a list of the zone sets as shown in the following example:
SANbox #> zoneset list
Current List of ZoneSets
------------------------
alpha
beta