Q-Logic 5802V Manuel D’Utilisation
7 – Zoning Configuration
Managing Zones
7-16
59263-01 A
S
Remove Zones from a Zone Set
Enter the
Remove command to remove zones from a zone set as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset remove zoneset_1 zone_1 zone_2
SANbox (admin-zoning) #>zoning save
Activate a Zone Set
Enter the
Activate command to apply zoning to the fabric as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoneset activate zoneset_1
Deactivate a Zone Set
Enter the
Deactivate command to deactivate the active zone set and
disable zoning in the fabric:
SANbox #> admin start
SANbox (admin) #> zoneset deactivate
Managing Zones
Managing Zones consists of the following tasks:
All of these tasks require an Admin session and a Zoning Edit session.