Q-Logic 5802V Manuel D’Utilisation

2 – Command Line Interface Usage

Entering Commands

2-4

59263-01  A

S

The command-line completion feature makes entering and repeating commands 
easier. 

 describes the command-line completion keystrokes.

To display help for a command, enter the 

 command followed by the 

command you are inquiring about. The following is an example of the help that is 
available for the 

Edit command.

SANbox #> help config edit

config edit [CONFIG_NAME]

This command initiates a configuration session and places the current session

into config edit mode.

If CONFIG_NAME is given and it exists, it gets edited; otherwise, it gets

created.  If it is not given, the currently active configuration is edited.

Admin mode is required for this command.

  Usage: config edit [CONFIG_NAME]

Tab

Completes the command line. Enter at least one character and press 
the tab key to complete the command line. If more than one possibility 
exists, press the Tab key again to display all possibilities.

Up Arrow

Scrolls backward through the list of previously entered commands.

Down Arrow

Scrolls forward through the list of previously entered commands.

Control-A

Moves the cursor to the beginning of the command line

Control-E

Moves the cursor to the end of the command line.

Control-U

Clears the command line.