Q-Logic 5802V Manuel D’Utilisation
2 – Command Line Interface Usage
Downloading and Uploading Files
59263-01 A
2-7
A
If your workstation does not have an FTP server, enter the Create Support
command to create the support file, and then use FTP to download the support file
from the switch to your workstation, as shown in the following example:
command to create the support file, and then use FTP to download the support file
from the switch to your workstation, as shown in the following example:
SANbox #> create support
Log Msg:[Creating the support file - this will take several seconds]
FTP the dump support file to another machine? (y/n): n
To download the support file from the switch to the workstation, do the following:
1.
Open a terminal window and move to the directory where you want to
download the support file.
download the support file.
2.
Enter the FTP command and the switch IP address or symbolic name.
>ftp 10.0.0.1
3.
When prompted for a user and password, enter the FTP account name and
password (images, images).
password (images, images).
user: images
password: images
4.
Set binary mode and use the Get command to download the file
(dump_support.tgz).
(dump_support.tgz).
ftp>bin
ftp>get dump_support.tgz
xxxxx bytes sent in xx secs.
ftp>quit
Downloading and Uploading Files
Several files that reside on the switch can be downloaded to the workstation for
examination or for safekeeping. These files include the following:
examination or for safekeeping. These files include the following:
Backup configuration file (configdata)
Log files (logfile)
Support files (dump_support.tgz)
You can upload firmware image files or backup configuration files to the switch to
reinstall firmware or restore a corrupted configuration. The switch uses FTP to
exchange files between the switch and the workstation.
reinstall firmware or restore a corrupted configuration. The switch uses FTP to
exchange files between the switch and the workstation.
To download a file from the switch to the workstation, do the following:
1.
Enter the FTP command and the switch IP address or symbolic name.
>ftp 10.0.0.1
2.
When prompted for a user and password, enter the FTP account name and
password (images, images).
password (images, images).
user: images
password: images