Q-Logic 5802V Manuel D’Utilisation

14 – Command Reference

Set Setup SNMP

59263-01  A

14-119

A

Configures SNMP on the switch.

Admin session

common
trap [trap_number]

common
Prompts you in a line-by-line fashion to change SNMP configuration parameters 
that are common for all traps. For each parameter, enter a new value or press the 
Enter key to accept the current value. To configure common parameters and trap 
parameters, omit the Common keyword. Refer to 

 for a description of 

the SNMP trap parameters. 

 describes the common SNMP 

configuration parameters.

SNMPEnabled

Enables (True) or disables (False) SNMP on the switch. The 
default is True.

Contact

Specifies the name of the person to be contacted to respond to 
trap events. The name can be up to 64 characters excluding #, 
semicolon (;), and comma (,). The default is undefined. This 
value is also passed to the Call Home service configuration.

Location

Specifies the name of the switch location. The name can be up 
to 64 characters excluding #, semicolon (;), and comma (,). 
The default is undefined. This value is also passed to the Call 
Home service configuration.

ReadCommunity

Read community password that authorizes an SNMP agent to 
read information from the switch. This is a write-only field. The 
value on the switch and the SNMP management server must 
be the same. The read community password can be up to 32 
characters excluding #, semicolon (;), and comma (,). The 
default is “public”.

WriteCommunity

Write community password that authorizes an SNMP agent to 
write information to the switch. This is a write-only field. The 
value on the switch and the SNMP management server must 
be the same. The write community password can be up to 32 
characters excluding #, semicolon (;), and comma (,). The 
default is “private”.