Q-Logic 5802V Manuel D’Utilisation

14 – Command Reference

Set Switch State

59263-01  A

14-131

A

Changes the administrative state for all ports on the switch. The previous Set 
Config Switch settings are restored after a switch reset or a reactivation of a 
switch configuration.

Admin session

[state] can be one of the following:

Activates and prepares the ports to send data. This is the default.

Prevents the ports from receiving signal and accepting a device login.

Prepares the ports for testing and prevents each port from accepting a 
device login. When you leave the diagnostics state, the switch automatically 
resets.

The following is an example of the Set Switch command:

SANbox #>admin start

SANbox (admin) #>set switch state offline