Q-Logic 5802V Manuel D’Utilisation

4 – Network Configuration

Configuring the Ethernet Port

4-2

59263-01  A

S

The 

 command displays the entire switch network 

configuration, which includes the following:

„

IP configurations (versions 4 and 6)

„

DNS server configuration

To display specific information, add the corresponding keyword. For example, to 
display IP version 6 configuration information, enter the Show Setup System Ipv6 
command:

SANbox #> show setup system ipv6

  System Information

  ------------------

  EthIPv6NetworkEnable         False

  EthIPv6NetworkDiscovery      Static

  EthIPv6NetworkAddress        2001::1/64

  EthIPv6GatewayAddress        fe80::1

Use the 

 command in an Admin session to configure the 

Ethernet port and other network parameters. You can configure all of the following 
parameters in one session, or you can configure specific parameters by adding 
the corresponding keyword:

„

„

„

The switch supports IP version 4, which includes the following:

„

Network discovery method

„

IP address

„

Subnet mask

„

IP gateway address

The network discovery method determines how the switch acquires its IP address. 
The IP address can come from the IP address that resides on the switch or from a 
server. The switch supports network discovery from the following server types:

„

Bootstrap Protocol (BootP)

„

Reverse Address Resolution Protocol (RARP)

„

Dynamic Host Configuration Protocol (DHCP)