Q-Logic 5802V Manuel D’Utilisation
14 – Command Reference
Show Media
59263-01 A
14-155
A
Show Media
Displays transceiver operational and diagnostic information for one or more ports.
Authority
None
Syntax
show media
[port_list]
all
installed
all
installed
Keywords
[port_list]
The port or ports for which to display transceiver information. [port_list] can be a
set of port numbers and ranges delimited by spaces. For example, [0 2 10-15]
specifies ports 0, 2, 10, 11, 12, 13, 14, and 15.
set of port numbers and ranges delimited by spaces. For example, [0 2 10-15]
specifies ports 0, 2, 10, 11, 12, 13, 14, and 15.
all
Displays transceiver information for all ports.
installed
Displays transceiver information for all ports that have transceivers installed.
Notes
describes the transceiver information in the Show Media display.
NOTE:
This command requires the SANdoctor license key. To purchase a license
key, contact your authorized maintenance provider or authorized reseller.
key, contact your authorized maintenance provider or authorized reseller.
Table 14-39. Transceiver Information
Information Type
Description
MediaType
Media physical variant. The variant indicates speed, media,
transmitter, and distance. The media designator may be M5
(multimode 50 micron), M6 (multimode 62.5 micron), or MX.
MX indicates that the media supports both multimode 50 and
62.5 micron.
transmitter, and distance. The media designator may be M5
(multimode 50 micron), M6 (multimode 62.5 micron), or MX.
MX indicates that the media supports both multimode 50 and
62.5 micron.
MediaType may also be on of the following:
NotInstalled–transceiver is not installed.
Unknown–transceiver does not have a serial ID.
NotApplicable–transceiver is not needed.
Unknown–transceiver does not have a serial ID.
NotApplicable–transceiver is not needed.
MediaVendor
Vendor name