Q-Logic 5802V Manuel D’Utilisation
14 – Command Reference
Show Switch
59263-01 A
14-181
A
Show Switch
Displays switch operational information.
Authority
None
Syntax
show switch
Notes
describes the switch operational parameters.
Table 14-41. Switch Operational Parameters
Parameter
Description
SymbolicName
Descriptive name for the switch
SwitchWWN
Switch worldwide name
BootVersion
PROM boot version
CreditPool
Number of port buffer credits available to recipient
ports
ports
DomainID
Switch domain ID
FirstPortAddress
Fibre Channel address of switch port 0
FlashSize - MBytes
Size of the flash memory in megabytes
LogFilterLevel
Event severity level used to record events in the
event log
event log
MaxPorts
Number of ports available on the switch
NumberOfResets
Number of times the switch has been reset over its
service life
service life
ReasonForLastReset
Action that caused the last reset
ActiveImageVersion - build date
Active firmware image version and build date.
PendingImageVersion - build date
Firmware image version and build date that is
pending. This image will become active at the next
reset or power cycle.
pending. This image will become active at the next
reset or power cycle.
ActiveConfiguration
Name of the switch configuration that is in use.
AdminState
Switch administrative state
AdminModeActive
Admin session status
BeaconOnStatus
Beacon status as set by the Set Beacon com-
mand.
mand.
OperationalState
Switch operational state