Q-Logic 5802V Manuel D’Utilisation

14 – Command Reference

Uptime

14-200

59263-01  A

S

Displays the elapsed up time since the switch was last reset and the reset 
method. A hot reset or non-disruptive firmware activation does not reset the 
elapsed up time reported by this command.

None

The following is an example of the Uptime command:

SANbox #> uptime

  Elapsed up time  : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)

  Reason last reset: NormalReset