Q-Logic 5802V Manuel D’Utilisation

14 – Command Reference

Zoneset

59263-01  A

14-209

A

Creates the zone set with the name given by [zone_set]. A zone set name must 
begin with a letter and be no longer than 64 characters. Valid characters are 0-9, 
A-Z, a-z, _, $, ^, and -. The zoning database supports a maximum of 256 zone 
sets. You must enter the 

 command afterwards to save your changes.

Deactivates the active zone set. Close the Zoning Edit session before using this 
keyword.

Deletes the zone set given by [zone_set]. If the specified zone set is active, the 
command is suspended until the zone set is deactivated. You must enter the 

 command afterwards to save your changes.

Displays a list of all zone sets. This keyword does not require an Admin session.

Removes a list of zones given by [zone_list] from the zone set given by 
[zone_set]. Use a <space> to delimit zone names in [zone_list]. If [zone_set] is the 
active zone set, the zone will not be removed until the zone set has been 
deactivated. You must enter the 

 command afterwards to save your 

changes.

Renames the zone set given by [zone_set_old] to the name given by 
[zone_set_new]. You can rename the active zone set. You must enter the 

 command afterwards to save your changes.

Displays all zones that are components of the zone set given by [zone_set]. This 
keyword does not require an Admin session.

„

A zone set must be active for its definitions to be applied to the fabric.

„

Only one zone set can be active at one time.

„

A zone can be a component of more than one zone set.