Q-Logic 5802V Manuel D’Utilisation

14 – Command Reference

Zoning Merged

59263-01  A

14-221

A

Displays the contents of the merged zone set, or saves the merged zone set to 
the non-volatile zoning database.

Admin session for the Capture keyword.

Saves the merged zone set to the non-volatile zoning database. You must enter 
the 

 command afterwards to save your changes. If you omit this 

keyword, this command displays the contents of the merged zone set.

The following is an example of the Zoning Merged command:

SANbox #> zoning merged

*********************************************************************

To permanently save the merged database locally, execute the

'zoning merged capture' command. To edit the merged database

use the ’zoning edit merged’ command. To remove the merged database

use the ’zoning restore’ command.

**********************************************************************

Merged (unsaved) Zoning Information

ZoneSet         Zone             ZoneMember

-------         ----             ----------

ZS1

                Z1

                                 10:00:00:c0:dd:00:b9:f9

                                 10:00:00:c0:dd:00:b9:fa

                Z2

                                 10:00:00:c0:dd:00:b9:fb

                                 10:00:00:c0:dd:00:b9:fc

The following is an example of the Zoning Merged Capture command:

SANbox (admin) #> zoning merged capture

  This command will overwrite the configured zoning database in NVRAM.

  Please confirm (y/n): [n] y

  The merged zoning database has been saved.