Q-Logic 5802V Manuel D’Utilisation

5 – Switch Configuration

Setting the Date and Time

59263-01  A

5-19

A

An NTP server can automatically set the switch date and time. To configure the 
switch to use an NTP server, enter the 

 

Ntp

 command in an 

Admin session to enable the NTP client on the switch and specify the NPT server 
IP address, as shown in the following example:

SANbox (admin) #> set setup system ntp

  A list of attributes with formatting and current values will follow.

  Enter a new value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Current Values:

    NTPClientEnabled        False

    NTPServerDiscovery      Static

    NTPServerAddress        10.20.10.10

  New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):

    NTPClientEnabled        (True / False)                    : True

    NTPServerDiscovery      (1=Static, 2=Dhcp, 3=Dhcpv6)      : 

    NTPServerAddress        (hostname, IPv4, or IPv6 Address) : 10.20.3.4

  Do you want to save and activate this system setup? (y/n): [n] y