Wybron PS600 Manuel D’Utilisation
23
Cables
Power/Data Cable
The Power/Data Cable uses 4-pin XLR connectors on either end and consists of two 14
AWG conductors and a 22 AWG twisted, shielded pair. The shells of the two XLR
connectors are not electrically connected together -- this prevents large power currents
from flowing from chassis to chassis of the equipment. The twisted pair shield is
connected at male XLR connector end only.
AWG conductors and a 22 AWG twisted, shielded pair. The shells of the two XLR
connectors are not electrically connected together -- this prevents large power currents
from flowing from chassis to chassis of the equipment. The twisted pair shield is
connected at male XLR connector end only.
XLR Pin # Wire Color Function
Size
1
White
Ground
14 AWG
2
Green
Data -
22 AWG
3
Red
Data +
22 AWG
4
Black
24VDC
14 AWG
DMX512 Control Cable
The DMX control cable from the lighting console to the power supply is a five conductor
cable with 5-pin XLR connectors on each end. The wiring pin out is specified by the
USITT DMX512/1990 standard.
cable with 5-pin XLR connectors on each end. The wiring pin out is specified by the
USITT DMX512/1990 standard.
XLR Pin # Function
1
1
Common
2
Data -
3
Data +
4
Talkback -
5
Talkback +