Panasonic PT-DW8300U Manuel D’Utilisation
PROJECTOR SETUP menu
80
- ENGLISH
Settings
Details of error
z
Error message
Remedial measure
[Exceed maximum
number of projectors.]
number of projectors.]
Limit number of
•
projectors in same group
to 8.
When linking 9 or
to 8.
When linking 9 or
•
more projectors, use a
computer and the [Multi
Projector Monitoring &
Control Software].
computer and the [Multi
Projector Monitoring &
Control Software].
[Please check the
COMMAND CONTROL
setting.]
COMMAND CONTROL
setting.]
Turn [ON] the
•
[COMMAND CONTROL]
on the on-screen menu
[NETWORK CONTROL]
for the projector with the
error display.
Set [COMMAND
on the on-screen menu
[NETWORK CONTROL]
for the projector with the
error display.
Set [COMMAND
•
PORT] of [NETWORK
CONTROL] of all linked
projectors to the same
value.
CONTROL] of all linked
projectors to the same
value.
[Please check the
USER NAME and
PASSWORD in the
COMMAND CONTROL
setting.]
USER NAME and
PASSWORD in the
COMMAND CONTROL
setting.]
Set the [USER NAME]
•
and [PASSWORD] for the
administrator authority for
[WEB CONTROL] of all
the linked projectors to
the same text string.
administrator authority for
[WEB CONTROL] of all
the linked projectors to
the same text string.
[Cannot apply
BRIGHTNESS
CONTROL. Please
check projector status.]
BRIGHTNESS
CONTROL. Please
check projector status.]
Projector is in standby
•
state. Turn on power.
[Brightness Sensor
Error]
Error]
There is a fault in the
•
brightness sensor. If the
fault is not corrected by
turning the power off and
back on, consult your
dealer.
fault is not corrected by
turning the power off and
back on, consult your
dealer.
Note
If the linked projectors are not listed, check the following.
z
The devices on the network all have different IP
•
addresses.
The LAN cable is connected correctly.
The LAN cable is connected correctly.
•
The sub-nets of the projectors are the same.
•
The [LINKS] are set in the same group.
•
z
When [MODE] of brightness control is
Q
set to [PC]
The name of this projector is displayed.
The state is indicated by color.
The state is indicated by color.
GREEN : The brightness can be corrected by a
significant margin.
YELLOW : The brightness can no longer be
corrected by a significant margin.
RED : There is an error in brightness control.
J
Example of adjustment procedure
for brightness control
for brightness control
The following is an example of adjustment procedure
for linking the brightness of 8 projectors that form a
network.
for linking the brightness of 8 projectors that form a
network.
Connect all the projectors to the hub
1 )
Turn on the power in all projectors.
2 )
Ensure [LAMP SELECT] of all the
3 )
projectors are either all set to [DUAL]
or all set to [SINGLE].
or all set to [SINGLE].
Set [MODE] of [BRIGHTNESS
4 )
CONTROL SETUP] to [OFF], and
select [APPLY].
select [APPLY].
Set [SUBNET MASK] of all the
5 )
projectors to the same value and set
their [IP ADDRESS] to different values
so that network communication can
be performed.
their [IP ADDRESS] to different values
so that network communication can
be performed.
Wait at least 8 minutes until the lamp
6 )
power stabilizes.
Set all the items in the [PICTURE]
7 )
menu of all the projectors to the same
value.
value.
To match the color, adjust [COLOR
8 )
MATCHING].
RETURN
MENU
MODE
PC
PROJECTOR2
BRIGHTNESS CONTROL STATUS