Emerson GXT2-10000RT208 Manuel D’Utilisation

The Load Level indicators display the approximate electrical load placed upon both output legs of the 

UPS at all times. Each indicator represents an approximate 25 percent increase in load. For optimum 

utilization of the UPS, distribute L-N loads to approximately balance the loads on L1 and L2. The last 

LED is amber and indicates the load exceeds 100% of the UPS’s capacity.

The Battery Level indicators display approximate battery capacity at all times. Each indicator repre-

sents an approximate 20 percent increase in battery capacity.
The Liebert GXT2-10000RT208 is equipped with automatic and remote battery test features. The 

automatic test occurs every 14 days (this option is user-configurable) if utility has not been inter-

rupted. Should the battery fail this test, the red Fault indicator along with the A and C diagnostic 

indicators will illuminate and an alarm will sound (refer to 13.0 - Troubleshooting). The remote 

test feature functions with Liebert MultiLink 3 software and can remotely initiate the battery test.

The Fault indicator is illuminated if the UPS has detected a problem. Also, one or more of the Battery 

Level indicators may be illuminated (refer to 13.0 - Troubleshooting section).

The Bypass indicator is illuminated when the UPS is operating from bypass power. An alarm will 

sound indicating the UPS detected a problem or the manual bypass function has been activated.

The UPS ON indicator is illuminated when the UPS inverter is operating and supplying power to 

your connected loads.

The battery indicator is illuminated when the UPS is operating on battery.

The AC Input indicator is illuminated when utility power is available and within the input specifica-

tions.