Casio WK-3200 Manuel D’Utilisation
43
Part V
Parameter Lists
These lists show the parameters that can be transferred individually using System Exclusive Messages.
•
Note 1: Any parameter that has "r" to the right of its Parameter ID number is a read-only parameter that can be
used for obtaining status information only. A parameter with "w" next to its Parameter ID is a write-only parameter,
which is used for commands, etc.
used for obtaining status information only. A parameter with "w" next to its Parameter ID is a write-only parameter,
which is used for commands, etc.
•
Note 2: All values in the System Exclusive Format table are hexadecimal. Except for the "Setting Value" column,
all values in the Parameter Lists are hexadecimal, unless specifically noted otherwise.
all values in the Parameter Lists are hexadecimal, unless specifically noted otherwise.
•
Note 3: Receipt of a value outside a specified range causes the value marked "Default" to be used instead.
20
Command Parameters
The parameters defined here mainly execute commands and indicate statuses. Values indicate the pointer to a
command or a status.
command or a status.
20.1
System Parameter List
System Exclusive Format
Field
Value
01
SYSEX
F0
02
MAN
44
03
MOD
11,02
04
dev
Either 00 to 1F, or 7F
05
act
00(IPC), 01(IPR)
06
cat
Command = 0
07
prm
00-7F
08
ilen/dlen 0 / bit size - 1
09
ps
LSB,MSB = 00, 00
10
index
00
11
data
See the Parameter List
12
sum
None
13
EOX
F7