Toshiba PRO L300D Manuel D’Utilisation

User’s Manual

8-10

Optional Devices

When you turn on the power, the computer automatically recognizes the 
monitor and determines whether it is color or monochrome.

You can use the HW Setup to select between 

 and 

 displays. Refer to Chapter 7, 

.

If you have selected 

 under the 

 options of the HW 

Setup, both the external monitor and the internal LCD will be active when 
you turn on the computer. If 

 is selected, only the external 

monitor will be active.

To change the display settings, press FN + F5. If you disconnect the 
monitor before you turn the computer off, be sure to press FN + F5 to 
switch to the internal display. Refer to Chapter 5, 

, for details 

on using hot keys to change the display setting.

Some models are equipped with HDMI out port than can send/receive 
video, audio and control signals by connecting with external display/audio 
devices.1080p, 720p, 576p and 480p signal formats can be supported, but 
actually available signal format depends on each HDMI devices. To 
connect external devices, follow the steps as detailed below:

1. Plug one end of the HDMI cable into the HDMI port of the HDMI 

device.

2. Plug the other end of the HDMI cable into the HDMI out port on your 

computer.

If you set LCD+Analog RGB for the computer’s display, you must set the 
computer’s display resolution to the same as that of the external monitor or 
other device, such as a projector.