Toshiba ProT1!0 Manuel D’Utilisation

Chapter 4 Replacement Procedures

4.13 CPU heat sink

Removing the CPU heat sink

The following describes the procedure for removing the CPU heat sink (See Figure 4-13-1).

1. Disconnect the Heat sink cable from the connector on the system board

2. Loose the following screws securing the heat sink holder along 1 to 3.

 M2.03.0F FLAT BIND screw x3

NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse

order of the number marked on the holder.

Figure 4-13-1 Remove the CPU heat sink

Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)