Toshiba PROA500 Manuel D’Utilisation
Error! Style not defined. Error! Style not defined.
4 Replacement Procedures
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. To separate the plate from the HDD, remove four M3x3 screws.
M3x3*4
Figure 4.3 Removing the HDD plate
CAUTION: Do not apply pressure to the top or bottom of the drive.
Satellite L500 Maintenance Manual
4-11