Mitsubishi Electronics CP3020DE Manuel D’Utilisation

2

 

•

Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams.

•

When print paper is rapidly transferred from a cool place to a hot place, vapour or dew will be
generated on the paper’s surface causing paper jams or degraded print quality.  Leave the
print paper in the room to stabilize its temperature before 

use

.

•

When print paper or ink sheet runs out during printing, the printing operation stops and the
MEDIA indicator blinks.  Set new ink sheet or print paper.

•

Do not use wet or damaged paper. It may cause malfunction.

•

Avoid touching or pulling the ink sheet with fingers. It may degrade the print quality.

•

When the ink sheet is exhausted, replace it with a new one. Used ink sheet is not reusable.

• Do not open the print paper and ink sheet until 

you are ready to

 use them.

• 

The

 paper sheet set is a combination of ink sheet and print paper. Use the combination

provided in the box. If the combination is changed, malfunction may occur.

2

2

2

2

2

• When the printed paper is touched 

with

 a wet hand, the print may be discoloured.

•

 Fading may occur if the print-face is exposed to organic chemical agents which may affect
print paper (e. g. alcohol, ester, ketone based).

•

Fading will be accelerated upon contact with PVC-based materials (e. g. adhesive tapes,
rubber erasers, etc.).

•

Do not put a print back into the paper tray. Doing so can cause jams and loss of completed
prints.

•

Store prints in a cool, dry environment free of chemical contamination. Avoid exposure to
high intensity light sources, particularly fluorescent light and sunlight, which are 

high

 in

ultraviolet radiation.

2

2

2

2

2

• Leaving the print paper in contact with PVC-based materials causes 

the

 print paper to

discolour or become

 stained.

• 

Never store print paper close to heaters or in hot, humid or dusty places

.

Keep print paper in a place where;

Temperature : 5

°

C - 30

°

C (41

°

F - 86

°

F)

Humidity

: 20% - 60%RH