Olivetti PG L26 Manuel D’Utilisation
PG L26/PG L26 Special User’s Guide – Paper recommendations > 46
A
UTOMATIC
FEED
SEQUENCE
With no optional feed trays installed, the Autotray function in the
Print Menu is set by default to OFF and the Tray sequence
function is set to DOWN. Ensure that the Autotray function is set
to ON (default) when you have either or both optional feed trays
installed. In this way, if a tray runs out of paper, automatic feed
will take place in the order Tray 1, Tray 2 (if fitted), optional Multi
Purpose Tray (if fitted), provided that these trays are set up for
identical media.
Print Menu is set by default to OFF and the Tray sequence
function is set to DOWN. Ensure that the Autotray function is set
to ON (default) when you have either or both optional feed trays
installed. In this way, if a tray runs out of paper, automatic feed
will take place in the order Tray 1, Tray 2 (if fitted), optional Multi
Purpose Tray (if fitted), provided that these trays are set up for
identical media.
P
RINTING
ENVELOPES
1.
Pull out the Rear Output Stacker (1) until it locks and lift
out the paper guide (2).
out the paper guide (2).
2.
Pull down the Manual Feed Tray (3) and adjust the paper
guides to the width of the envelope.
guides to the width of the envelope.
3.
Insert the envelope, flap down and to the left, until the
printer grips it.
printer grips it.
4.
Set envelope size and landscape orientation in your
software, then issue the print command.
software, then issue the print command.
1
2
3