Olivetti P26W Manuel D’Utilisation

Network Configuration> 33

To apply configuration changes using a Web browser, you will be 
prompted for a username and password. The username is [root] 
and the default password is the last six characters of the Ethernet 
(MAC) address (any alpha characters must be in upper case).

The root password can be changed to allow you to configure the 
printer by using a Web browser/TELNET/AdminManager. To 
change the root password, select “Password Configuration” in the 
Maintenance tab and follow the on-screen instructions.

The network addresses used in this manual are shown as 
examples only. Network addresses used in your installation must 
be generated from your own network.

Configure the IP Address, Subnet Mask and Gateway for 
the network card. Launch the Web browser, enter the IP 
Address of the network interface card in [Address 
(Location/Position)] and press the [Enter] key. The Printer 
Status screen is displayed.

Select a tab and items to be changed in the left frame. 
You need to log in as “root” to be able to configure all 
items. Non-root users cannot configure all items.

To ensure correct operation, follow the procedure below 
for the appropriate network browser.