Olivetti P26W Manuel D’Utilisation

Novell NetWare> 65

The printer’s configuration page reports information that is 
required for NetWare configuration. To print a configuration 
page, while the printer is switched on, depress the NIC’s push-
button for three seconds and then release.

The information that you require is the printer’s Ethernet 
address. The first six characters of the Ethernet address are the 
same for all network interfaces. The last six characters of the 
Ethernet address are unique to each card

This is all the information that is required to setup the printer for 
NetWare.

Use NWAdmin32 or the Pconsole utility to create and setup 
NetWare printer objects. Please refer to Novell documentation for 
instructions on how to achieve this.

Use the Network Card Setup 
Utility (AdminManager) or 
other printer manager 
software, (Web browser, 
JetAdmin, etc.) to configure the 
network interface card. For 
instructions please refer to the 
Configuration Utility section 
and online help. The illustration 
here shows the NetWare 
configuration page from 
AdminManager.

This provides a gateway for NDPS. Gateways allow NDPS clients 
to send jobs to printers that are not NDPS-aware (that is, printers 
that are not equipped with embedded NDPS Printer Agents). You 
select and configure a printer gateway when you create a new 
Printer Agent.