Olivetti P26W Manuel D’Utilisation
Network Configuration> 7
S
PECIFICATION
S
ELF
-
DIAGNOSTIC
TEST
With the printer power switched on, press the push-button
located on the network interface panel (at the rear of the printer)
for more than three seconds and release. The self-diagnostic test
results and configuration settings are printed.
located on the network interface panel (at the rear of the printer)
for more than three seconds and release. The self-diagnostic test
results and configuration settings are printed.
Frame Types
IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
IEEE 802.3
Ethernet-II, SNAP, AUTO
Network Interface
100BASE-TX
10BASE-T
10BASE-T
Network Protocols
TCP/IP
Network layer
ARP, RARP, IP, ICMP
Session layer
TCP, UDP
Application layer LPR, FTP, TELNET, HTTP,
IPP, BOOTP, DHCP, SNMP,
DNS, SMTP, POP3, SLP,
Rendezvous
DNS, SMTP, POP3, SLP,
Rendezvous
IPX/SPX (NetWare)
Remote printer mode (up to eight file
servers and 32 queues)
Print server mode over IPX/SPX (up to
eight print servers)
Encrypted password supported in print
server mode
SNMP
servers and 32 queues)
Print server mode over IPX/SPX (up to
eight print servers)
Encrypted password supported in print
server mode
SNMP
EtherTalk
ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP,
PAP
PAP
NetBEUI
SMB, NetBIOS, WINS
Functions
Self-diagnostic test printing
Banner supported
Monitoring and configuration by Web browser
Printer status notification by E-Mail
Banner supported
Monitoring and configuration by Web browser
Printer status notification by E-Mail