Manualsbrain.com
  1. Manuels
  2. Marques
  3. Olivetti
  4. P26W
  5. Manuel D’Utilisation

Olivetti P26W Manuel D’Utilisation

Télécharger
Page de 95
UNIX> 72
O
PERATING
 
SYSTEM
 
CONFIGURATION
This section explains how to configure a printer for major UNIX 
operating systems.
S
UN
 OS 4.
X
.
X
 (BSD) 
CONFIGURATION
The following explanation uses Sun OS 4.1.3 and a C7300V2 
printer as examples. The absolute path of commands and the 
configuration method may differ between OS versions, so refer to 
the workstation manuals for more information.
If you do not have Superuser rights, the network manager should 
conduct the configuration.
1.
Login as [root] to the workstation. 
2.
Register the IP address of the network card and the host 
name in the /etc/hosts file.
Example: for IP address 192.168.20.127 and host name 
c7350
192.168.20.127 c7350
3.
Use the ping command to confirm connection with the 
network card.
Example: for host name c7350
# ping c7350
If there is no reply, then there is a problem with the 
configuration of the IP address (the IP address has already 
been set manually or dynamically) or with the network. 
Reset the network interface card settings to their defaults 
and then try to set a temporary IP address. If you still have 
the problem after resetting the network interface card, 
consult the network manager.
CAUTION!
If an incorrect IP Address, Subnet Mask or Gateway is 
entered, the network may go down or other damage 
may occur. Check the address with the network 
manager and confirm that the IP address of the printer 
has been set.