Fujitsu FTP-633MCL400 Manuel D’Utilisation

■

This battery driven, micro line thermal printer offers high speed
printing for 3-inch wide paper (70 mm).  It is suitable for portable
equipment that requires compact,  lightweight components.

In addition to the interface board, a driving LSI (MCU + Gate
Array) is also available.

■

head and batteries)
It can be driven by a broad range of voltages (4.2 to 8.5 V) of
NiCd or Nickel-Hydrogen by using Fujitsu Components'
unique head drive control system. The battery pack can be
connected directly to the print head without a voltage
regulator. Also, a lithium-ion battery can be applied.

It can print at approximately 24 character lines/s (460
dotlines/s = 60 mm/s).

It  has a light weight of approximately 84 g.

The peak current for head driving is approximately 3.0 A.

Front, rear and top paper insertion paths can be used.

Paper feeding is enabled by operating the head up lever.

This model is capable of printing on a variety of papers,
including 1-ply roll paper, 2-ply paper (TCC and roll), labels,
and long-life paper.

1