FARGO electronic 410 Manuel D’Utilisation
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
12
Technician Review of Printer Features
See the next page. Refer to the Technician Handbook for CardJet Card Printers in this
section.
section.
Function Description
Top Cover Opens to allow access to the Ink Cartridges and Card Path. This cover must
be closed in order for the Printer to begin printing. See Opening the Top
Cover to the Card Printer on page 27. See CardJet Engineering Drawing
R400019 in the appendix.
Cover to the Card Printer on page 27. See CardJet Engineering Drawing
R400019 in the appendix.
Ink
Cartridge
Cradle
Cartridge
Cradle
Holds the Ink Cartridges and moves them back and forth across the card
during printing. (Note: Before Ink Cartridges can be loaded into the Printer,
the Printer Driver must be installed and the Printer's Power and USB cables
must be connected.)
during printing. (Note: Before Ink Cartridges can be loaded into the Printer,
the Printer Driver must be installed and the Printer's Power and USB cables
must be connected.)
Once this is done, the Printer's Ink Cartridge Cradle will move to the center
position whenever the Top Cover is open.
position whenever the Top Cover is open.
Card
Output
Hopper
Output
Hopper
Catches printed cards as they eject from the Printer. This Hopper will hold a
maximum of 50 cards. The Card Output Hopper Door can be either opened
or closed while printing, but If you would like printed cards to stack neatly,
leave the door closed, as shown below. (Note: An external Card Output
Hopper is provided if the Printer model includes the Magnetic Stripe
Encoding Module.)
maximum of 50 cards. The Card Output Hopper Door can be either opened
or closed while printing, but If you would like printed cards to stack neatly,
leave the door closed, as shown below. (Note: An external Card Output
Hopper is provided if the Printer model includes the Magnetic Stripe
Encoding Module.)