FARGO electronic 410 Manuel D’Utilisation
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
40
Loading the Card Cartridge (continued)
Step Procedure
3
Set the Card Cartridge onto the Card Input Hopper with the arrow on the top of
the Cartridge pointing toward the front of the Printer as shown below. Push the
Card Cartridge down until it clicks into place. See the next two pages. (Note:
When installed properly, the Card LED light will turn off to signal that the Card
Cartridge is ready for printing.)
the Cartridge pointing toward the front of the Printer as shown below. Push the
Card Cartridge down until it clicks into place. See the next two pages. (Note:
When installed properly, the Card LED light will turn off to signal that the Card
Cartridge is ready for printing.)
Caution: When not in use, keep the Card Cartridge in place to prevent
dust from accumulating on the Drive Rollers.