FARGO electronic 410 Manuel D’Utilisation
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
72
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Un-
programmed
color Ink
Cartridge
programmed
color Ink
Cartridge
The Printer correctly detects and reports an un-programmed color Ink
Cartridge via the Ink LED and on-screen message. See Ink LED and
Error Messages in Section 2.
Cartridge via the Ink LED and on-screen message. See Ink LED and
Error Messages in Section 2.
Un-
programmed
black Ink
Cartridge
programmed
black Ink
Cartridge
The Printer correctly detects and reports an un-programmed black Ink
Cartridge via ink LED and on-screen message. See Ink LED and Error
Messages in Section 2.
Cartridge via ink LED and on-screen message. See Ink LED and Error
Messages in Section 2.
USB Interface
(Universal
Serial Bus;
electrical
structure)
(Universal
Serial Bus;
electrical
structure)
A 1.5MB/sec (12MB/sec) serial communication interface that can
support 127 separate devices consisting of 4 wires: power, ground,
data in and data out.
support 127 separate devices consisting of 4 wires: power, ground,
data in and data out.
•
Interface to PC and Power Supply: The system uses USB
interface to communicate to a PC and internal power supply.
Firmware initializes Fargo Controller Board.
interface to communicate to a PC and internal power supply.
Firmware initializes Fargo Controller Board.
•
Controller: The Fargo Controller supports USB 1.1 support.
•
Firmware: The Firmware is downloaded if the Printer has been
unpowered and then you power it up and connect the USB cable.
The Firmware is a part of Fargo PC Driver. To upgrade the
Firmware, the Operator has to update the Driver.
unpowered and then you power it up and connect the USB cable.
The Firmware is a part of Fargo PC Driver. To upgrade the
Firmware, the Operator has to update the Driver.
•
System connections: The system has one USB upstream, type B
connector to a PC and 3 downstream channels, with internal
connections going to Fargo Controller, HP Print Engine and optional
encoding Board.
connector to a PC and 3 downstream channels, with internal
connections going to Fargo Controller, HP Print Engine and optional
encoding Board.
USB Hub
Windows recognizes three (3) USB devices: the Print Engine, the
Fargo Controller and an on-Board USB hub (needed to split USB
upstream into three USB downstream channels).
Fargo Controller and an on-Board USB hub (needed to split USB
upstream into three USB downstream channels).