Epson TM-U375 Manuel D’Utilisation
Notes:
1. This function can be used only when a direct connection display
module is connected to the display module connector.
2. DIP switch settings cannot be changed after the power is turned
on or after the printer is reset through the interface. When
turning the power on, do not change the settings of DIP switches
7 and 8.
7 and 8.
TM-U375P DIP-switch functions
DIP Switch Set 1
SW Function O N
1-1 Auto line feed Enabled
OFF
Disabled
l-2 Receive buffer capacity
l-3 Undefined
l-4 Undefined
1-5 Undefined
1-6 Undefined
l-7 Undefined
l-8 Undefined
l-3 Undefined
l-4 Undefined
1-5 Undefined
1-6 Undefined
l-7 Undefined
l-8 Undefined
40 bytes 4K bytes
DIP Switch Set 2
S W Function
2-1 Undefined
2-2 Print column selection
2-1 Undefined
2-2 Print column selection
7 X 9 font/9 X 9 font
2-3 Handshaking (busy condition)
2-4 Reserved.
2-5 Settings must not be changed.
2-6 Settings must not be changed.
2-7 Undefined
2-8 nInit reset signal Fixed to ON.
2-5 Settings must not be changed.
2-6 Settings must not be changed.
2-7 Undefined
2-8 nInit reset signal Fixed to ON.
ON OFF
42CPL/35CPL 40CPL/33CPL
Receive Off-line or
buffer full receive buffer full
CAUTION:
Do not change the settings of switch 2-4, 2-5, 2-6 and 2-8.
5. Replace the DIP switch cover and secure it with the screw.
1-22 Setting
Up
the Printer