Epson TM-U375 Manuel D’Utilisation
Paper feeding direction
Do not use Use carefully Use carefully
Glued area
Glue Location of Slip paper
Cut sheets with holes (e.g., sprocket holes) within the areas shown in the
figures below must not be used. Otherwise, the paper cannot be detected by
the paper detector. Paper that is translucent must not be used.
figures below must not be used. Otherwise, the paper cannot be detected by
the paper detector. Paper that is translucent must not be used.
Validation paper
Holes are prohibited in
this area.
Slip paper
Holes are
in this
direction
to
paper-end
detection (using
l
Use of multi-ply copy paper with a thick middle sheet may decrease copying
capability.
l
Printing noise may change depending on paper thickness. Noise may
increase when thick single-ply paper is used.
Reference Information 4-5