Xerox 8830 Manuel D’Utilisation

 

The CUSTOM R/E PRESETS option controls which 
reduction/enlargement ratios are displayed when Preset is selected from 
the Reduction/Enlargement portion of the Scanner Control Panel.  You 
can specify up to six reduction/enlargement presets. 

To specify a reduction/enlargement preset: 

1.  Press the Menu key.  The MAIN MENU screen is displayed. 

2.  Press the Enter key to select CONFIGURATION.  The 

CONFIGURATION menu screen is displayed. 

3.  Press the Next key until COPY OPTIONS is highlighted. 

4.  Press the Enter key to select COPY OPTIONS.  The COPY 

OPTIONS menu screen is displayed. 

5.  Press the Next key until CUSTOM R/E PRESETS is highlighted. 

6.  Press the Enter key to select CUSTOM R/E PRESETS.  The 

CUSTOM R/E PRESETS screen is displayed.  Below is an 
example of the CUSTOM R/E PRESETS screen. 

CUSTOM R/E PRESETS

100.0%

100.0%

100.0%

100.0%

100.0%

100.0%

 

7.  Press the Previous or Next key to highlight the value you wish 

to change. 

8.  Use the numeric keypad to enter the desired value. The valid 

value range is from 25 to 400%. 

9.  Press the Enter key to confirm the value. 

10.  Repeat steps 7 through 9 for each value you wish to change. 

11.  Press the Exit key to return to the COPY OPTIONS menu 

screen. 

 

The IMAGING option allows you to perform the following functions: 

• 

Enable or disable automatic image rotation.  If AUTO ROTATE is 
enabled, the scanned image will be electronically rotated, if 
necessary, to better fit the specified output format. 

• 

REDUCTION LINE PRESERVATION 

To enable/disable the imaging options: