Black Box PI125A-R2 Manuel D’Utilisation
![Black Box](https://files.manualsbrain.com/attachments/93f582e81b91156050f0dfb0bd85a42bc8635e07/common/fit/150/50/2f54d4d876583e31f45c92e398ef3997c2dece9a115125c2fd1224ff9c81/brand_logo.png)
12
SERIAL
↔PARALLEL CONVERTERS
The Converters use a miniature configuration switch
package. To configure your unit, use a small screwdriver
and gently push each switch to its proper setting. The
ON and OFF positions are shown in Figure 3-2. Default
settings (noted with an asterisk) for the DIP switches
are shown in the table on the following page.
package. To configure your unit, use a small screwdriver
and gently push each switch to its proper setting. The
ON and OFF positions are shown in Figure 3-2. Default
settings (noted with an asterisk) for the DIP switches
are shown in the table on the following page.
Set up the Converter by selecting the appropriate
DIP-switch settings for your application.
DIP-switch settings for your application.