Xerox 180 EPS Manuel D’Utilisation

A save problem means that a job is submitted from a client with 
Save designated, but the job is not saved.

•

Problem:  The job has a status of “Save Completed,” but 
nothing is saved.

1. Ensure that the banner and error pages are enabled.

2. Submit the job for printing.

3. If only the banner page prints and the job shows a status 

of “Successfully Completed,” check the PDL file for invalid 
“showpage” operators or no image data.

4. If possible, submit the job to a draft printer. If the job prints 

successfully, contact the customer support center.

•

Problem:  The job has a status of “Save Completed with 
errors,” but nothing is saved:

1. Ensure that the banner and error pages are enabled.

2. Submit the job for printing.

3. Check the error page for the information following the 

statement “OFFENDING COMMAND” to correct the PDL 
file if it is corrupt.

4. If possible, submit the job to a draft printer. If the job prints 

successfully, contact the customer support center.

•

Problem:  You are receiving PostScript error messages while 
trying to merge variable data with the form.

Create the variable data file by using the Adobe driver.

This section explains how to recover a job after a system crash or 
rollover, in Streaming and Spooling modes.

In Streaming mode, the printing system begins processing 
(decomposing and printing) the data stream as soon as a 
minimum amount of data is received, and continues to process the 
data as it is received.

If the system crashes during the printing of an LCDS report, the 
software tries to recover to a page boundary. If this recovery is 
successful, you do not notice anything different with the output of 
your recovered report, but you are asked to restart the system 
after a crash. The recovered page may be offset from the rest of